iBoot is a software developed to install MAC OS X on
PCs or Laptops that are based on Intel. Therefore for the best MAC OS X
installation Download iBoot, the most convenient and effective program that is
trusted for an advanced conduct.
iBoot Latest Version
All the Desktop and Laptop models working with the
line of Intel processors can use this iBoot + MultiBeast method to install MAC
OS X. So processors like Core i3, i5, i7 included in latest models are
supported to iBoot at the same time finely maintained with older CoreDuo,
Core2Duo, and Pentium 4 also. So you hardly integrate any issue as iBoot + MultiBeast
is a working method with a truly supportive interface with a good support to
both new and old processors.
Note: iBoot + MultiBeast Method does not work with
AMD processors
There several iBoot versions, namely,
- iBoot 3.3.0
- iBoot Haswell 1.0.1
- iBoot Ivy Bridge 1.1.0
- iBoot Legacy 2.7.2
So there you have to be cautious about your system
setting, when deciding which version is most applicable for the task. Once you
Download iBoot, it is not troublesome to carry on with MAC OS X installation on
Windows.
What you need for the Process?
- PC or Laptop with an Intel processor
- Blank CD/DVD
- MAC OS X Snow Leopard DVD (Head to Apple online Store)
- If you want to get connected with a community of users with parallel hardware/resources head to TONY MAC86 Forum, where you will not feel alone
How to get prepared for the Process?
- Prior to all have a complete backup of the device’s data
- Get ready with a 1 graphics card in the 1st PCIe Slot while 1 monitor plugged in
- Only keeping the blank one you are going to install Mac OS X Snow Leopard remove all other Hard Disks
- Only keeping Keyboard and Mouse remove all USB devices
- Only keeping graphics remove all PCI cards
- Format and be ready with an empty Hard Drive
How-To?
BIO Settings
- Step 1: Get Default BIO settings
- Step 2: Set CD ROM and Boot Priority list
- Step 3: Deactivate eXtreme Hard drive XHD feature
- Step 4: Set up “ACPI suspend form” to S3 (STR)
Installing
MAC OS X
Now you need to Download iBoot and burn it on the CD
to start the installation. Desktop machines and laptops that are integrated unproven
Intel CPUs and graphics download and use legacy version of iBoot as
default iBoot is not respond for them.
- Step 1: Download iBoot
- Step 2: Burn to CD/DVD
- Step 3: Keep iBoot CD/DVD in your Rom and make sure to restart the PC
- Step 4: Once the prompt appears, eject iBoot and get the CD out
- Step 5: Insert "Mac OS X Snow Leopard" CD/DVD into the ROM and press F5 to continue
- Step 6: When you see the screen as below, hit “Enter”
- Step 7: In the next screen, open “Utilities/Disk Utility”
- Step 8: Then partition the Hard Drive to “GUID Partition Table”
- Step 9: Set-up your Hard Drive to “Mac OS Extended”
- (Please Note: Bootloader only boot from a Disk or Partition of 1TB or lower)
- Step 10: When asked where to install close the Disk Utility and select Snow Leopard
- Step 11: Select Customize and then uncheck additional options
- Step 12: Restart the PC
- Step 13: Now put iBoot back in the Drive
- Step 14: When you note the boot section screen, select the new Snow Leopard installation
Now follow screen
instructions and set up the additional.
Video Guide
By Download iBoot you can
easily install MAC OS X on your Intel based PC or Laptop. So now have a good
time with the change you made in your System.
